Minelab Vanquish V8 Coil Cover
Minelab Vanquish V8 Coil cover.
Protection for the coil!
This is a genuine Minelab accessory, also fits the smaller coil in the Vanquish 540 Pro Pack.
- Reviews (0)
Out of stock
EQUINOX RED-BELLY CARBON SHAFT SYSTEMRated 5.00 out of 5
New to Unearthed .
Detect-Ed Red-Belly Black *Special Edition – Equinox Carbon Shaft [UPPER & LOWER]
The Land & Sea Carbon Shaft is a complete replacement of the stock Minelab Equinox shaft, ideal for underwater and land detecting. The Detect-Ed model’s light-weight, no-wobble, strong design proves steadfast in durability and a lasting investment.
This Land & Sea Carbon Shaft Set compliments the Equinox by further enhancing its lightness and all-terrain abilities.
– Quality Carbon Fibre
Lightweight, quality weave and smooth finish!
– No Wobble
Provides a strong crisp swing
– 40% Lighter
Than the full stock Equinox shaft (170g vs 286g)
– Collapses Shorter
Shortens to 170mm / 7″ shorter (overall length)
– Shortened Position
Ideal for water use and transport
– New Clamp System
Custom plastic injection moulded clamp system extremely durable and hard clamping
– High-grade Stainless Hardware
Stainless 316 hardware for corrosion resistance
– Fully Extends
Lengthens to full size for normal use
Low Gloss finish Carbon for far greater scratch resistant than its glossy counterparts
– Unique Hole-less design
When assembled the LS-Carbon shaft has no exposed holes for pins or the arm cuff, this means the shaft gets very little dirt or sand inside it while out detecting and contributes to its very sleek look and unmatched structural integrity.
– Easy Installation
Simply remove your control pod (with the hex key we provide), remove the arm cuff and install them on your Detect-Ed carbon shaft.
– What’s Included?
In your package, you’ll find a Detect-Ed Upper Shaft & Detect-Ed Lower Shaft, including a Hex Key for fitment.
Upper Shaft: 885mm & Lower Shaft: 611mm
*rubber grommets not included. The new coil connector design makes the grommets protrude from the connector, eliminating wear on the coil ears and reducing the likelihood of them snapping.
Minelab E-Trac Environmental cover
New to Unearthed UK.
Control Box cover for the Minelab E-Trac, genuine Minelab accessory.
Keeps the control box dry and mud free.
Out of stock
MINELAB EQUINOX COIL SAVERS (mix and match washers)
New to Unearthed.
Tear drop rubber coil washer upgrades for the Minelab Equinox 600 & 800
This pack of 8 x ‘Coil Savers’ rubber teardrop washers includes two thicknesses of washers for use in the Minelab Equinox coil connector/yoke (4 x 2mm black washers and 4 x 3mm red washers).
The washers can be mixed and matched to give the exact thickness you need for your coil and coil connector/yoke).
Suitable for standard shafts and Detect-ed shafts.
– Eliminate coil ear wear
– Reduced chance of coil ear breakage
– Tighter coil !(no floppy coil)
– Easy coil bolt tightening
– Suitable for use with Stock Shafts & Detect-Ed Carbon Fibre Shafts.
*Detect-Ed and Unearthed do not guarantee that these will stop Equinox coil-ears from snapping. Detect-Ed and unearthed are not responsible for incorrect use of the Coil-Savers.
*It is up to buyers to use them correctly according to your requirements.
Out of stock
MINELAB EQUINOX ALLOY ARM CUFFRated 5.00 out of 5
New to Unearthed.
The Detect-Ed Alloy Arm Cuff is a high-quality CNC cut aluminium part, with smooth edges all round. It is designed primarily to replace the fragile plastic arm cuffs found on many metal detectors!
The cuff is designed to be ergonomic as it hugs the arm rather than the sloppier fit of most modern machines. The placement is not dictated by the holes on your shaft, allowing you to bolt it in your preferred position.
We designed the arm cuff without padding so that it’s compatible with submerged and wet environments. However, the low profile button heads are essentially unnoticeable on your forearm and product testers have confirmed this. It also has rounded edges for comfort
The arm strap points are lower than some standard cuffs meaning your arm is strapped down snugly in place rather than bouncing off the walls of the cuff.
This product comes with everything included to easily install it on your detector!
Fits Most Metal Detectors:
– Fits on 7/8″ or 22mm diameter shaft.
– Fits Minelab Equinox 600 & 800, Excalibur & Gold Monster
– Fits most Whites Detectors
– Fits most Garrett Detectors (AT Pro, Gold, Max and Ace Series)
What’s In The Box?
– Anodized Aluminium Arm Cup and Stand,
– 2 x Aluminium Tube Clamp sets,
– 4 x 316 Marine Grade Low-Profile Stainless Bolts,
– 4 x 316 Marine Grade Nyloc Nuts,
– 1 x Webbed Velcro Arm Strap,
– 1 x Hex Key Tool,
– 1 x Spanner Tool.