Related products

• 

  Minelab Equinox 15″DD COIL COVER

  COIL COVER FOR THE LARGE 15″ DD COIL COVER FOR EQUINOX METAL DETECTORS.

  £31.99 Add to basket
• 

  Minelab Equinox 15 inch Search coil

  Rated 5.00 out of 5

  NEW TO UNEARTHED UK!

  The 15×12″ elliptical Double-D accessory coil for the Minelab Equinox Series offers you the maximum depth and is ideal for a wider ground coverage in open areas, A genuine Minelab Product!

  Includes a coil cover as standard.

  SUITABLE FOR:

  • All Minelab Equinox models, 800 & 600.
  • now in stock!
  £219.00 Add to basket
• 

  NEW! MINELAB PRO-FIND 20

  NEW TO UNEARTHED UK
  Minelab Pro-Find 20 Pin-Point Probe
  The Pro-Find 20 is the latest addition the Minelab’s Pro-Find series of pin-point probes, bridging the gap between the 15 and 35 models.You can quickly and easily locate targets while digging with a variable audio tone plus vibration indication.

  It features a lost alarm and high visibility yellow body to ensure you don’t lose your pointer. The pin-pointer is splash and weather-proof, so it’s fine to use in damp and drizzly conditions and comes complete with a belt mounted holster to keep it safe and accessible by your side at all times. A good solid Probe at an attractive price!

  £99.99 Add to basket
• 

  FULL CARBON FIBRE SHAFT FOR MINELAB EQUINOX

  NEW TO UNEARTHED UK

  The ultimate lightweight carbon fibre stem for the Minelab Equinox metal detector. The unique design offers the very best in quality and style to enhance your experience with the Minelab Equinox.

  Lower stem with iso-tip
  The two part construction is both strong and light while being easily adjustable. It has all the holes for adjusting the arm cup and total length from the original three piece shaft but will fold much shorter while fully assembled by retracting the lower stem almost fully into the upper.

  Adjustments to the lower stem is made simple by our own quick release, lever cam-lock made from tough light nylon and a no-nonsense one-piece stainless steel button clip. The cam-lock has been specially designed to be compatible with standard Minelab spare parts. In the event of wear the lever, pivot pin and press block may be replaced with those from the Minelab E-Trac and Safari cam-locks, giving you peace of mind that spares are available from Minelab outlets.

  ENHANCED DESIGN
  A slight change to the upper shaft specification allows the lower to slide more freely inside it. The lower shaft has shed a little weight since the first batch bringing it down to just 70 grams. We have also redesigned the iso-tip which holds the coil, now held in place with a flexible aerospace grade epoxy resin. A further enhancement is the addition of drain holes in the tip to allow water to run out freely after detecting in water.

  Equinox Carbon Shaft with the 15 Inch Coil
  The Equinox Carbon Shaft with the 15 Inch Coil
  Our prototype design has been field tested with the 15″ coil (EQX15) to ensure the cam-lock and button clip gives a firm hold free from any wobble.

  In addition to this full shaft we can supply just the upper or the lower shaft separately.

  Both parts are compatible and interchangeable with the standard Minelab Equinox shafts allowing you to swap and change parts at your convenience, for example a spare lower may be used to hold an accessory coil for quick change over.

  CMD Quick release cam-lockCMD Quick release cam-lock
  CMD’s Quick Release Cam-Lock
  MATERIALS
  Upper and Lower Shaft
  Carbon Fibre, for maximum strength at minimum weight.
  Cam-Lock and Iso-Tip
  Nylon, tough, durable and light.
  Button Clip and Cam-Lock Pivot
  Stainless Steel, avoids corrosion in salt water use.
  SPECIFICATION
  Upper Shaft Length
  880mm
  Upper Shaft Weight
  106g
  Lower Shaft Length
  615mm
  Lower Shaft Weight
  70g
  Total Length Retracted
  965mm
  Max Length Extended
  1378mm
  Min Length Extended
  1098mm
  Total Weight
  176g

  £89.99 Add to basket